CES 353 Tile Ceramic Bond Strength Tester is a precision testing instrument used to determine the pull-off adhesion strength between ceramic tiles and tile adhesives or substrates. It is commonly used in construction sites, testing laboratories, and R&D departments to verify tile installation quality, evaluate adhesive performance, and detect bonding failures. The tester helps ensure durable tile fixing and compliance with relevant ASTM, EN, or ISO standards, making it essential for quality control in ceramic tile and building material applications.
Caltech India is the leading manufacturer and supplier of CES 353 Tile Ceramic Bond Strength Tester. A Tile Pull Off Adhesion Tester evaluates the effectiveness of tile adhesives or mortars by applying controlled force until the bond fails, providing quantitative data on bond strength. A Tile Adhesive Bond Strength Tester is a precision instrument used to measure the adhesion strength between ceramic tiles and their substrate. It is also used in civil engineering decorative bricks and tiles, mosaics, and exterior wall insulation materials (EPS, SPS panels). The Tile Ceramic Bond Strength Testing Equipment is technically relevant because it enables compliance with internationally recognized standards such as EN 12004, IS 15477, EN 1015-12, ISO 13007-2, ASTM C482, EN 1348, and ANSI A118.1, ensuring reliable measurement of tensile and shear adhesion strength for ceramic tile adhesives.
The Tile Ceramic Bond Strength Adhesion Tester is a precision-engineered device designed to measure the adhesive strength between ceramic tiles and their substrates. Built for reliability and accuracy, this tester helps construction professionals, quality inspectors, and researchers evaluate the durability of tile installations. With its robust design and easy-to-use mechanism, it ensures consistent results in compliance with industry standards. Ideal for laboratories, tile manufacturers, and on-site testing, the instrument provides critical data to prevent tile failures and guarantee long-lasting performance in flooring and wall applications.
Intelligent Bond Strength Tester is widely used in construction quality control, research, and standards compliance to ensure reliable tile installation and long-term durability of flooring and wall applications. It is also suitable for detecting the bond strength of exterior wall decorative bricks, exterior wall insulation materials, mosaics, various boards, and paint materials.
Applications: Tile adhesive quality testing, ceramic tile bond evaluation, flooring installation assessment, wall tile adhesion testing, construction material quality control, on-site tile bond verification, adhesive performance comparison, failure analysis of tiled surfaces, compliance with building standards, R&D testing for tile adhesives.
Product Features:
- Built in micro hydraulic system, compact, lightweight and easy to carry
- The main structure of CES 353 is manufactured by combining aluminum alloy and stainless-steel material
- CES 353 standard embedded digital pressure gauge
- Operation menu with functions such as reset, peak, and storage
- During calibration, there are 10 segments of broken line correction to improve the accuracy of instrument calibration
- Low power consumption design, will automatic shutdown if no operation, sustainable operation for over 200 hours
- Two measurement modes: KN and MPa
- Switch the size of the pulling block and automatically calculate the strength value based on the force value and area.
Standards: ASTM C482, ISO 13007-2, ISO 10545-2, EN 12004, IS 15477, EN 1015-12, EN 1348, and ANSI A118.1 (depending upon configuration)
Ordering Information:
| CES 353 – Tile / Ceramic Bond Strength Tester | |
| Model | CES-353 |
| Test Block | 40mm x 40mm (Standard – 3pcs) 95mm x 45mm (Standard – 3pcs) 100mm x 100mm Ø50mm (Dia.) |
| Instrument Structure | Integrated Design |
| Measuring Range | 0-10KN / 0-6.25MPa |
| Max. Pull Off Pressure | 100mm x 100mm: 0~1.0 MPa ; 95mm x 45mm: 0~2.5 MPa ; 40mm x 40mm: 0~6 Mpa ; Ø50mm: 0~5 MPa |
| Units of Measurement | KN / MPa (Adjustable) |
| Resolution | 0.001KN/0.001MPa |
| Piston Stroke | 10 mm |
| Accuracy | ± 1% |
| Display | LCD Screen with Backlight |
| Data Storage | 200 nos |
| Peak Hold | Yes |
| Correction Method | full scale or 10 segment line correction (to improve accuracy) |
| Main Material | Combination of Aluminum Alloy and Stainless Steel |
| Operating Temp. | 0-45°C |
| Power Supply | 3.6V Battery / 4.2V Rechargeable Battery |
| Weight | 1.8Kg |
| Packing List | Main Unit Adhesive Glue Standard Test Block – 40mm x 40mm (3 pcs) Standard Test Block – 95mm x 45mm (3 pcs) Carrying Case |
In India, we have various customers from Mumbai, Delhi, Bangalore, Chennai, Hyderabad, Ahmedabad, Kolkata, Surat, Pune, Jaipur, Lucknow, Kanpur, Nagpur, Visakhapatnam, Indore, Bhopal, Patna, Vadodara, Ghaziabad, Ludhiana, Coimbatore, Madurai, Nashik, Srinagar, Aurangabad, Dhanbad, Allahabad and Ranchi in India.
We also export our range of products to worldwide countries like USA, Canada, Chile, United Kingdom – UK, Spain, Germany, Italy, Dubai, Abu Dhabi, U.A.E, Oman, Saudi Arabia, Singapore, Kuwait, Iran, Indonesia, Thailand, and many more as well.
