Paint / Coating Testing
Instruments & Inspection Kits
Cathodic Protection
Instruments & Equipments
Corrosion Testing
Instruments & Accessories
Welding Inspection
Instruments & Accessories

Socket Weld Contraction Rings

Patented
  • Every socket weld gap, the proper 1/16" minimum required by ANSI 31.1 Section III ASME US Navy & Military Codes
  • No more scribe and pull out procedure
  • No more measuring or guessing gap distance
  • And no more cracked welds due to contraction of improperly gapped joints
  • Every socket weld gap, the proper 1/16" minimum required by ANSI 31.1 Section III ASME US Navy & Military Codes
  • No more scribe and pull out procedure
  • No more measuring or guessing gap distance
  • And no more cracked welds due to contraction of improperly gapped joints
Every packet of Gap-A-Let socket weld contraction rings comes with a certified test report verifying the chemical analysis and physical properties of material shipped. While G.A.L. Gage Company does guarantee the test reports on the product material, any product can be misused, which in this instance could result in an improper weld. This certification and the use of Gap-A-Let ring in no way guarantees the quality, condition or durability of the weld. G.A.L. Gage Company will assume no responsibility for damage to the piping system or to component parts due to the use or misuse of this ring.
 
Part No.                Description
GAPxxx                  Gap -A-Let Rings Pkg. of 20  (xxx = Size of ring required i.e 0.25 for 1/4")
Caltech Engineering Services

D-104, Twin Arcade, Military Road, Marol, Andheri (East), Mumbai- 400 059 India
Tel: (+91-22) 29204050 / 29201454 Fax: (+91-22) 29250932 Email: info@caltechindia.com