|
 |
||||||||
 |
| Holiday Detector HD-05 | ||||||||
|
||||||||
Holiday detector is suitable for all types of coatings like fusion bonded epoxy, coal tar epoxy, paints, polyester, polyurethane, pipeline tapes, heat shrinks and asphalt. This versatile unit can be used to inspect protective coatings applied to pipelines, tanks, pilings, fire lines or buried pipelines of conductive surface. A test voltage is applied to the coating by moving a brush probe across the surface and where there is either a pinhole or flaw the voltage will spark through the coating at the flawed location a red flashing indicator will flash and an audible alarm will sound the detected flaw can now be marked for subsequent repair and testing resumed for the remaining surface area, if no flaws are detected the test will therefore be non-destructive. The value of the test voltage is achieved by the dielectric or voltage strength of the coating thickness. Therefore 1000 micron would by approx 3kv to 5kv test voltage. The Instrument can be used as per AS 3894.1, ASTM D 4787, ASTM G 6, ASTM D 5162, BS 1344-11, ISO 2746, NACE RP0274, NACE RP0490, NACE RP0188-88 standards. Accurate voltage setting is achieved by adjusting a knob to desire voltage is displayed on a digital display with increment of 0.1KV.Internal Jeep tester ensures that the selected voltage equals the test voltage. Calibration certificates are available with traceability as per international standards. Automatic fault detection feature installed which ensures that are detected at any voltage setting. The Instrument has low voltage battery indication for safeguard the batteries and ensures desired voltage all the time. The holiday detector is lightweight and overall weight with handle is approx 3.6 kg the test voltage is of low power and does not damage or cause burn marks on the coating. When the using holiday detector there are a number of important safety features built in the test voltage is high impedance and drops to zero when a fault is detected, earth cable is lockable to prevent accidental disconnection. In view of the many different holiday testing applications there is an extensive range of accessories available including circular brushes for pipe work internal, rolling springs for pipe work externals, broad brushes to allow for quicker measurement of large surface areas and insulated extension rods. Holiday detector is supplied in a carrying case complete with conductive rubber brush, neck strap, earth cable and batteries fitted. Other special size circular internal brushes and external rolling spring electrodes can be manufactured to order. We also supply high voltage measuring device generally called as Jeep Meter, PRM Meter to verify voltage of holiday detectors. |
||||||||
|
||||||||
| Caltech Engineering Services |
D-104, Twin Arcade, Military Road, Marol, Andheri (East), Mumbai- 400 059 India |
