| Electrode: |
Copper-Copper/Sulfate reference electrode |
| Construction: |
Rugged PVC / ABS Body, with exposed copper sulfate mixture |
| Long Life: |
20-year reference electrode |
| Applications: |
Under ground without chloride (<500 PPM) or fresh water or seawater contamination |
| Recommendations: |
Best Results with rapid wetting backfill, such as bentonite to ensure a moist environment for the reference electrode. |
| Environment: |
Low Freezing Point and high boiling pointmakes rugged product in most environments. |
| High Purity: |
Certified Copper rod to 99.9%, CuSO4 by T&R. |
| Cost: |
Less expensive than Copper Sulfate permanent reference electrodes from other manufacturers |
| Tip: |
Proprietary, non-tip electrode, with direct exposure of copper sulfate mixture to backfill/soil. |
| Encapsulant: |
used to permanently seal the connection, ensuring that there is no contaminate or foreign contacts made with the lead wire connection |
| Dimensions: |
2.875” diameter, 4.88” long, weight 32 Oz (0.896 Kgs) |
| Test Certificate: |
Each DB-A is provided with Tinker & Rasor Certificate of Compliance. |
