The Eban 2000Mk2 Coating Thickness Meters is top performance instruments with a modular design allowing an extensive range of feature options to be chosen at time of purchase or upgrade in the future.
Easy to use, place the probe on the coating to be measured, there will be a beep and the measurement will be display, this will be retained on the display until the next measurement has been taken.
Easy and accurate multi-calibration facility for different substrate shapes and blast cleaned profiles.
Detachable flexible lead, constant pressure measuring probes, with the ferrous probe capable of measuring intermittently on hot work.
Conform to BS, ISO, DIN, ASTM and SSPC methods of measurement; Calibration Certificates having trace ability is available. Instrument has accuracy of up to ±1% when referred to reference standards.
Eban 2000 Mk2 is standard range model. Simply select the feature that you need either at the time of purchase or upgrade in the future. The Eban 2000 Mk2 also has the option of upgrade to the higher specification Eban 3000 Mk2.
| Feature in as standard |
| Back Light |
Allows measurements to be easily seen in dimly lit locations |
| |
| Feature options A (Part No CA001) |
| Mean / Average |
Gives Mean / Average for all measurements |
| No of Readings |
Shows the Number of Readings taken |
| Micron / Mill conversion |
Display both Metric Microns and Imperial Thous / USA mills |
| |
| Range of models |
| C2200 |
Ferrous 0-1000 µm |
| C2201 |
Non-Ferrous 0-1000 µm |
| C2202 |
Ferrous & Non Ferrous combined 0-1000 µm |
| C2203 |
Ferrous 0-5.00mm |
| C2204 |
Non-Ferrous 0-2000 µm |
| C2205 |
Ferrous 0-5.00mm & Non-Ferrous 2000 µm |
|
