Coating Testing & Inspection Kits>> BresleTest Kit
 

Bresle Test Kit - Chloride & Salt Test on Steel Surface

 
The bresle test kit also known as chloride test kit or salt test kit is highly important instrument to evaluate chlorides or/and salt on surface of steel surface. Bresle test kit is supplied with all the necessary items including the bresle test patches, syringes, distilled water, calibration solution and conductivity meter to test for soluble salt and surface contaminants on blasted surfaces in compliance with ISO 8502-6 & ISO 8502-9.

Many coatings fail due to salts such as chlorides and sulphates contaminating the surface prior to the coating application. Importance of chloride and soluble salt is therefore essential test recommended by leading users of oil & gas, Offshore, pipe coating & other industries.

Bresle test can be performed quickly at site, shop and at most locations quickly and simply using the Bresle Test Kit.

Bresle testing cost is highly economical and can be used for production of coated pipes or after surface blasting at number of locations.

The Bresle Patch is attached to the surface, the distilled water is injected with a syringe into the Bresle Patch and then extracted, this is repeated ten cycles of injecting and extracting the liquid in the Bresle Patch. This liquid is then measured with the Conductivity Meter will measure the quantity of salts in both µg/cm2 (ppm) and mg/m2

Complies with ISO 8502-6, which relates to the extraction of soluble contaminants using the Bresle Patch method and ISO 8502-9, which relates to the conductometric determination of soluble salts.

 

The Bresle Test Kit is supplied with 50 x Bresle Patches , Conductivity Meter, Calibration Solution. 3 x 5ml Syringes, 25ml Beaker and 250ml Distilled water in soft carrying case
 
Additional Bresle Patches can be purchased to carry out further tests using this kit.
 
Part Numbers
BTK-001 Bresle Test Kit
BTK-002 Bresle Patch (Pack of 50)
 
 

Caltech Engineering Services
D-104, Twin Arcade, Military Road, Marol, Andheri (East), Mumbai- 400 059 India
Tel: (+91-22) 29204050 / 29201454 Fax: (+91-22) 29250932 Email:
info@caltechindia.com